首页 > 产品 > Sub 1GHz 无线通信芯片 > A9508
A9508
产品选择指南
General Description
A9508 is a high performance and low cost Sub1GHz ISM band system-on-chip (SoC) wireless transceiver. This device integrates high speed pipeline 8051 MCU, 16KBytes In-system programmable flash memory, 2KB SRAM, LCD driver, various powerful functions, and excellent performance of Sub1GHz GFSK/FSK transceiver. A9508 has various operating modes, making it highly suited for systems where ultra-low power consumption is required. A9508 has a high resolution 24bit ADC for temperature senor; a 8bit ADC for RSSI and 8 channels 12bit ADC for general purpose. Three kinds of serial communication port (SPI, I2C and UART) can interact with other device(s).

A9508 is one of AMICCOM sub1GHz family. It integrates AMICCOM sub1GHz transceiver well and offers a low cost solution with advanced radio features such as high output power amplifier and low noise receiver. Therefore, A9508 is very suitable for long LOS (line-of-sight) applications without the need to add an external LNA or PA.

The on-chip data rate divider supports programmable on-air data rates from 2K to 500Kbps to satisfy different system requirements. For a battery powered system, A9508 supports fast PLL settling time, Xtal settling time and on-chip Regulator settling time to reduce average power consumption.
 COB Package (10X10, 95 pins).
 High performance pipeline complicated 8051
 Operation clock: 1, 1/2, 1/4, 1/8, 1/16, 1/32 of crystal oscillator.
 16KB Flash memory, 2KB SRAM
 UART, I2C, SPI serial communication
 Three 16/8-bit counter/timers
 Two channels PWM
 Watchdog timer
 Sleep timer
 In-Circuit Debugger
 In-System programming/ In-Application programming
 40 GPIO
 Two channels 24bit ADC for thermal resistor
 Eight channels 12bit SAR ADC
 Integrated LCD driver for up to 96 segments.
 One channel 8 bit ADC for RSSI and battery detect
 Programmable threshold of carrier detect.
 Frequency band: 315/433/470/868/915 MHz.
 FSK and GFSK modulation.
 Programmable data rate from 2Kbps to 500Kbps.
 RX Current consumption (AGC Off) 915MHz: 17.4mA.
 TX Current consumption 915MHz: 77mA @ 16.4dBm.
 PM3 current (without sleep timer): 2.6uA
 On chip regulator, support input voltage 2.0 ~ 3.6 V.
 High RX sensitivity 915MHz.
 -109dBm at 50Kbps on-air data rate.
 -106dBm at 100Kbps on-air data rate.
 -104dBm at 150Kbps on-air data rate.
 -103dBm at 250Kbps on-air data rate.
 Support low cost crystal 12.8 MHz /16 MHz.
 Support RTC clock 32.678KHz
 Fast PLL settling time (35 us).
 9-bits Digital RSSI and Auto RSSI measurement
 Auto Calibrations.
 Auto FCS (CRC) and Filtering.
 On-chip full range VCO and Fractional-N PLL synthesizer.
 On-chip low power RC oscillator for WOR (Wake on RX) function.
 AFC (Auto Frequency Compensation) for frequency drift due to Xtal aging.
 Separated 64 bytes FIFO for RX and TX.
 Built-in Battery Detect, Thermal Sensor and Crystal load capacitors.

 Wireless sensor networks
 Industrial monitoring and control
 Wireless alarm and security system
 Wireless ISM band data communication
 Remote control
 Home and building automation
Datasheet
Application Note
Reference circuit design (Module)
Reference code
Evaluation kit (EK)
Development Board (DVP)
ICE tool
Flash/OTP programming tool
Production test tool
*Please contact the agents or sales for more details