首页 > 产品 > Sub 1GHz 无线通信芯片 > A7209
A7209
产品选择指南
General Description
A7209 is a monolithic low-IF architecture CMOS ASK receiver for wireless applications in the 315/433/868/915 ISM bands. A7209 supports the easy-to-use hardware mode with data rate for 1k ~ 10kbps. User can set power on/off, operation frequency and data rate via IC pins, there is no need to use external MCU for system operation in this mode.
A7209 also support SPI mode which is more flexible if user want to change the operation frequency and data rate according to their own applications. For SPI mode incorporates a baseband demodulator and support ASK data rate up to 50Kbps. A7209’s control registers are accessed via 3-wire SPI interface. Another one, via SPI as well, is the unique strobe command. A7209 can be controlled from power saving mode (deep sleep, sleep, idle, standby) to PLL mode, and RX mode. Additional features including on-chip regulator, low battery detector, Auto calibration (VCO, IF Filter), on-chip capacitors for Xtal loading are also supported. Overall, A7209’s highly integrated function and low current consumption offer a reduced BOM cost for a high performance ISM bands product.
 Small size QFN 4x4 20pins
 Frequency band: 315/433/868/915MHz.
 ASK data rate 1kbps to 10kbps in hardware mode
 Programmable data rate from 1kbps to 50kbps in SPI mode
 On chip regulator, supports input voltage 1.8 ~ 3.6 V.
 Sleep current 0.6uA.
 Low Current Consumption
 RX Current consumption 433.92MHz: 4mA for hardware control mode.
 Supports low cost crystal 12.8MHz.
 RX sensitivity at 433.92MHz.
 -113dBm at 1kbps.
 -112.5dBm at 2.4kbps
 -113dBm at 5kbps
 -113dBm at 10kbps
 Easy to use hardware control mode without MCU..
 Flexible SPI mode
 Support 3-wire SPI.
 Unique Strobe command via SPI to change to IC operation mode.
 More features supported and more flexible hardware configuration via SPI.
 ISM Band Data Communication
 Wireless Remote Controller
 RKE (Remote Keyless Entry)