首页 > 产品 > 無線音頻产品 > A9101
A9101
产品选择指南
General Description
A9101 is a low cost Sub-1GHz ISM voice SOC. In the RF part, this device integrates both high sensitivity receiver and a programmable power amplifier. Based on Data Rate Register, user can configure on-air data rates to either 500Kbps ~ 2Mbps. In the digital part, it integrates high speed pipeline 8051 MCU, 16 KB In-system programmable flash memory, 256Bytes internal SRAM, 512Bytes external SRAM and various powerful functions.
A9101 supports fast PLL settling time for frequency hopping system. For packet handling, A9101 has built-in separated (128 bytes) TX/RX FIFO for data buffering and burst transmission, auto-ack and auto-resend, CRC for error packet filtering, FEC (7,4 hamming code) for 1-bit data correction per code word, RSSI for clear channel assessment, thermal sensor to monitor relative temperature, WOR (Wake on RX) function to support periodically wake up from sleep mode to RX mode and listen for incoming packets without MCU interaction, data whitening for data encryption / decryption. Those functions are very easy to use while developing a wireless system.
RF
 Frequency band: 315/433/868/915MHz.
 FSK or GFSK modulation.
 High RX sensitivity 915MHz:
 -100dBm at data rate 512kbps.
 Programmable data rate 512K/2.048Mbps.
 Fast PLL settling time for frequency hopping system.
 Support low cost crystal (16.384 MHz).
 Easy to use.
 ONE register setting for new channel frequency.
 CRC Error Packet Filtering.
 Auto-acknowledgement and auto-resend.
 Separated 128Byte TX/RX FIFO.
 8-bits RSSI measurement for clear channel indication.
 Auto Calibrations.
 Auto IF function.
 FEC by (7, 4) Hamming code (1 bit error correction / code word).
 Easy FIFO / Segment FIFO.
Low Power
 PM3 current (0.5uA without sleep timer).
 RX current consumption 915MHz:22mA (AGC on).
 TX current consumption 915MHz: 84.4mA (16.5dBm)
Microcontroller
 Integrate 8051 compatible MCU.
 16KByte flash, 256Bytes internal data RAM, 512Bytes external data RAM.
Peripherals
 On chip regulator, support input voltage 2.2 ~ 3.6V.
 On chip low power RC oscillator for WOR (Wake on RX) function.
 AGC (Auto Gain Control) for wide RSSI dynamic range.
 AFC (Auto Frequency Compensation) for frequency drift due to temperature.
 Low Battery Detector indication.
 250mW speaker driver output.
Layout
 Package size:QFN6x6(48 pins)
 Sub1GHz voice baby monitor
 Wireless voice toy
 Wireless microphone system
 Sub1GHz Walkie-Talkie
Datasheet
Application Note
Reference circuit design (Module)
Reference code
Evaluation kit (EK)
Development Board (DVP)
ICE tool
Flash/OTP programming tool
Production test tool
*Please contact the agents or sales for more details