首頁 > 產品 > Sub 1GHz 無線通訊晶片 > A7112
A7112
產品選擇指南
General Description
A7112 is a monolithic low-IF architecture CMOS FSK/GFSK TRX for wireless applications in the 315/433/470/510/868/ 915 MHz ISM bands. In addition, this device is especially suitable for the 470MHz ~ 510MHz wireless AMR (Auto Meter Reading) in China.

A7112 is one of AMICCOM’s high performance Sub 1GHz family chips. This device offers a low cost solution with advanced radio features such as high output power amplifier up to 13 dBm (433MHz band, including LPF and HPF) and low phase noise receiver (- 114 dBm @ 10Kbps, -110dBm @50Kbps). Therefore, A7112 is very suitable for long LOS (line-of-sight) applications without the need to add an external LNA or PA.

The on-chip data rate divider supports programmable on-air data rates from 2K to 250Kbps to satisfy different system requirements. For a battery powered system, A7112 supports fast PLL settling time (35 us), Xtal settling time (500 us) and on-chip Regulator settling time (450 us) to reduce average power consumption.

For packet handling, A7112 supports direct mode as well as FIFO mode. In the RX direct mode, GIO1 or GIO2 can be serially output the raw data from the digital demodulator. In the TX direct mode, MCU can serially feed the digital data to GIO1 or GIO2 which is connected to the modulator. In the other hand, a packet in FIFO mode, the preamble is self-generated and the physical packet ID is programmable up to 8 bytes. The built-in separated 64-bytes TX/RX FIFO is treated as payload for data buffering including CRC of error detection, FEC of error correction, data whitening for data encryption / decryption, and Manchester encoding.

Additional device features such as on-chip regulator, low battery detect, carrier detect, preamble detect, frame sync in FIFO mode, AGC (Auto Gain Control), AFC (Auto Frequency compensation), Auto calibration (VCO and IF Filter), programmable IF Filter, multi Xtal sources, on-chip Xtal compensated capacitors, and RSSI for the clear channel assistance are used to simplify system development and cost. Overall, A7112 is a high performance and a highly integrated ISM bands TRX with low BOM cost.
 Small size (QFN 4X4, 20 pins).
 Frequency band: 315/433/470/510 /868/915MHz.
 FSK and GFSK modulation.
 Supports 3-wire or 4-wire SPI.
 Deep sleep current (0.2uA).
 Low sleep current (2 uA).
 TX Current consumption 433MHz: 40mA @ 13dBm.
 RX Current consumption (AGC Off) 434MHz: 13.5 mA
 On chip regulator, supports input voltage 2.0 ~ 3.6 V.
 Programmable data rate from 2Kbps to 250Kbps.
 Physical 64 bytes TX/RX FIFO buffers.
 FIFO extension up to 256 bytes.
 High RX sensitivity 433.92MHz.
 -117dBm at 2Kbps on-air data rate.
 -114dBm at 10Kbps on-air data rate.
 -110dBm at 50Kbps on-air data rate.
 -107dBm at 100Kbps on-air data rate.
 -106dBm at 150Kbps on-air data rate.
 -103dBm at 250Kbps on-air data rate.
 Fast PLL settling time (35 us).
 On-chip full range VCO and Fractional-N PLL synthesizer.
 On-chip low power RC oscillator for WOR (Wake on RX) function.
 AFC (Auto Frequency Compensation) for frequency drift due to Xtal aging.
 Supports low cost crystal (12,8 / 16 MHz).
 On chip 8-bit ADC and RSSI (Received Signal Strength Indicator).
 Programmable IF filter bandwidth (50K / 100K / 150KHz / 250KHz).
 Programmable threshold of carrier detect.
 Frame synchronization recognition in FIFO mode.
 FEC / Manchester / data whitening / CRC-16 (CRC-CCITT).
 Wireless ISM band data communication
 Remote Control
 RKE (Remote Keyless Entry)
 Wireless Energy Management
 Home Automation
 AMR (Auto Meter Reading)
Datasheet
Application Note
Reference circuit design (Module)
Reference code
Evaluation kit (EK)
Development Kit (DK)
Production test tool
*Please contact the agents or sales for more details