 |
|
首頁 > 產品 > 2.4GHz 無線通訊晶片 > A8125M0
A8125M0
產品選擇指南
| General Description |
|
A8125M0 is a high performance and low cost 2.4GHz ISM band FSK/GFSK wireless SoC. It integrates M0 micro controller, 128KBytes flash memory and 32KBytes SRAM. For packet handling, A8125M0 has built-in separated 64-bytes TX/RX FIFO for data buffering and burst transmission, auto-ack and auto-resend, CRC for error packet filtering, FEC for 1-bit data correction per code word, RSSI for clear channel assessment, thermal sensor for monitoring relative temperature, WOR (Wake on RX) function to support periodically wake up from sleep mode to RX mode and listen for incoming packets without MCU interaction. In addition, A8125M0 has built-in AES128 co-processor (Advanced Encryption Standard) for advanced data encryption or decryption which consists of the transformation of a 128-bit block into an encrypted 128-bit block. Those functions are very easy to use while developing a wireless system. For low current consumption, A8125M0 is integrated with both LDO and DC-DC (buck) so that this device can be operated more efficient. User can configure one of them (LDO or DC-DC) as a powered source for device operations. |
RF
Frequency band: 2400 – 2500MHz.
FSK and GFSK modulation
High sensitivity:
-96dBm at 500Kbps data rate
-93dm at 1Mbps data rate
-90dBm at 2Mbps data rate
Programmable data rate 8K ~ 2Mbps
Fast settling time synthesizer for frequency hopping system
Support 16MHz crystal
Easy to use.
Change frequency channel by one register setting
8-bits Digital RSSI for clear channel indication
Auto RSSI measurement
Auto WOR (wake up when receive RX packet)
Auto WOT (wake up to transmit TX packet)
Auto Calibrations
Auto IF function
Auto Frequency Compensation
Auto CRC Check and filtering
Separated 64 bytes RX and TX FIFO
Support logical FIFO extension up to 256 bytes
Auto-ACK and Auto-resend scheme
Clear channel assessment (CCA)
Support ED (Energy Detect) for CCA
Auto CSMA-CA
Low Power
Wide Range Operation Voltage from 2.0V ~ 3.6V
RX current consumption with MCU stop and DC-DC turn on: 7.1mA @VDD_IO= 3.3V
TX current consumption with MCU stop and DC-DC turn on: 9.2mA @ 5dBm, VDD_IO=3.3V
Power saving MODE without sleep timer, 1KB SRAM retention (1.7uA)
Power saving MODE with sleep timer, 1KB SRAM retention (2uA)
Microcontroller
High performance ARM-M0 MCU
128KB Flash memory with copy protection, 32KB SARM
Peripherals
Three UART, one I2C, two SPI serial communication
Operation clock: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 of crystal oscillator
Two 32-bit timers and one 32-bit dual mode timer
8 channels PWM
Watchdog timer
Two 24-bit Sleep timer by IRC
In-Circuit Debugger
In-System programming/ In-Application programming
24 GPIO and Key wake-up
Built-in thermal sensor for monitoring relative temperature
Built-in eight channels 12-bits ADC for general purpose analog input
Built-in Low Battery Detector
Built-in AES128 co-processor
Tag
Support ISO14443 type-A PICC
Data rate: 106Kbps
Integrate load modulation capacitor
7 Byte UID
Frequency band: 2400 – 2500MHz.
FSK and GFSK modulation
High sensitivity:
-96dBm at 500Kbps data rate
-93dm at 1Mbps data rate
-90dBm at 2Mbps data rate
Programmable data rate 8K ~ 2Mbps
Fast settling time synthesizer for frequency hopping system
Support 16MHz crystal
Easy to use.
Change frequency channel by one register setting
8-bits Digital RSSI for clear channel indication
Auto RSSI measurement
Auto WOR (wake up when receive RX packet)
Auto WOT (wake up to transmit TX packet)
Auto Calibrations
Auto IF function
Auto Frequency Compensation
Auto CRC Check and filtering
Separated 64 bytes RX and TX FIFO
Support logical FIFO extension up to 256 bytes
Auto-ACK and Auto-resend scheme
Clear channel assessment (CCA)
Support ED (Energy Detect) for CCA
Auto CSMA-CA
Low Power
Wide Range Operation Voltage from 2.0V ~ 3.6V
RX current consumption with MCU stop and DC-DC turn on: 7.1mA @VDD_IO= 3.3V
TX current consumption with MCU stop and DC-DC turn on: 9.2mA @ 5dBm, VDD_IO=3.3V
Power saving MODE without sleep timer, 1KB SRAM retention (1.7uA)
Power saving MODE with sleep timer, 1KB SRAM retention (2uA)
Microcontroller
High performance ARM-M0 MCU
128KB Flash memory with copy protection, 32KB SARM
Peripherals
Three UART, one I2C, two SPI serial communication
Operation clock: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 of crystal oscillator
Two 32-bit timers and one 32-bit dual mode timer
8 channels PWM
Watchdog timer
Two 24-bit Sleep timer by IRC
In-Circuit Debugger
In-System programming/ In-Application programming
24 GPIO and Key wake-up
Built-in thermal sensor for monitoring relative temperature
Built-in eight channels 12-bits ADC for general purpose analog input
Built-in Low Battery Detector
Built-in AES128 co-processor
Tag
Support ISO14443 type-A PICC
Data rate: 106Kbps
Integrate load modulation capacitor
7 Byte UID
Wireless sensor network
2.4GHz active RFID
2.4GHz ISM system
Smart remote controller
Home and building automation
Wireless toys and game controllers
2.4GHz active RFID
2.4GHz ISM system
Smart remote controller
Home and building automation
Wireless toys and game controllers
Datasheet
Application Note
Reference circuit design (Module)
Reference code
Evaluation kit (EK)
Development Board (DVP)
ICE tool
Flash/OTP programming tool
Production test tool
*Please contact the agents or sales for more details
Application Note
Reference circuit design (Module)
Reference code
Evaluation kit (EK)
Development Board (DVP)
ICE tool
Flash/OTP programming tool
Production test tool
*Please contact the agents or sales for more details
