 |
|
首頁 > 產品 > Bluetooth® LE/Zigbee > A3107M0
A3107M0
產品選擇指南
| General Description |
|
A3107M0 is a high performance and low cost 2.4GHz FSK/GFSK system-on-chip (SoC) wireless transceiver. With on chip fraction-N synthesizer, it is designed for Bluetooth Low Energy (Bluetooth 5.1 Single mode, master or slave role). A3107M0 has various powerful functions and excellent performance of a leading 2.4GHz FSK/GFSK RF transceiver. A3107M0 has various operating MODEs, making it highly suited for systems where ultra-low power consumption is required. A3107M0 supports AES128 engine and CCM. For low current consumption, A3107M0 is integrated with both LDO and DC-DC (buck) so that this device can be operated more efficient when VDD voltage range from 2.7V to 3.6V. User can configure one of them (LDO or DC-DC) as a powered source for device operations. |
RF
Frequency band: 2400 – 2483MHz.
FSK and GFSK modulation
High sensitivity:
-97dBm at 500Kbps data rate
-94dm at 1Mbps data rate
-91dBm at 2Mbps data rate
Programmable data rate 5K ~ 2Mbps
Fast settling time synthesizer for frequency hopping system
Support 16MHz crystal
Easy to use.
Change frequency channel by one register setting
8-bits Digital RSSI for clear channel indication
Auto RSSI measurement
Auto WOR (wake up to receive RX packet)
Auto WOT (wake up to transmit TX packet)
Auto Calibrations
Auto IF function
Auto Frequency Compensation
Auto CRC Check
Separated 256 bytes RX and TX FIFO
Low Power
Wide Range Operation Voltage from 2.0V ~ 3.6V
RX current consumption with MCU stop and DC-DC turn on: 6.4mA @BATH= 3.3V
TX current consumption with MCU stop and DC-DC turn on: 9mA @ 5dBm, BATH=3.3V
Power saving MODE without sleep timer, no SRAM retention (1.3 uA)
Power saving MODE with sleep timer, 16K SRAM retention (2.1uA)
Microcontroller
High performance ARM-M0 MCU
256KB Flash memory with copy protection, 32KB SRAM
Peripherals
LCD controller with DMA and 8080 output interface(I80)
UART, I2C, SPI serial communication
Operation clock: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 of crystal oscillator
Two 32-bit timers and one 32-bit dual MODE timer
Four Channel PWM
Watchdog timer
Two 16-bit Sleep timer
In-Circuit Debugger
In-System programming/ In-Application programming
23/31 GPIO for QFN40/48
Built-in thermal sensor for monitoring relative temperature
Built-in eight channels 12-bits ADC for general purpose analog input (0V ~ 1.8 V)
Built-in Low Battery Detector
Layout
Package size (QFN5X5, 40 pins/ QFN6X6 48 pins)
Frequency band: 2400 – 2483MHz.
FSK and GFSK modulation
High sensitivity:
-97dBm at 500Kbps data rate
-94dm at 1Mbps data rate
-91dBm at 2Mbps data rate
Programmable data rate 5K ~ 2Mbps
Fast settling time synthesizer for frequency hopping system
Support 16MHz crystal
Easy to use.
Change frequency channel by one register setting
8-bits Digital RSSI for clear channel indication
Auto RSSI measurement
Auto WOR (wake up to receive RX packet)
Auto WOT (wake up to transmit TX packet)
Auto Calibrations
Auto IF function
Auto Frequency Compensation
Auto CRC Check
Separated 256 bytes RX and TX FIFO
Low Power
Wide Range Operation Voltage from 2.0V ~ 3.6V
RX current consumption with MCU stop and DC-DC turn on: 6.4mA @BATH= 3.3V
TX current consumption with MCU stop and DC-DC turn on: 9mA @ 5dBm, BATH=3.3V
Power saving MODE without sleep timer, no SRAM retention (1.3 uA)
Power saving MODE with sleep timer, 16K SRAM retention (2.1uA)
Microcontroller
High performance ARM-M0 MCU
256KB Flash memory with copy protection, 32KB SRAM
Peripherals
LCD controller with DMA and 8080 output interface(I80)
UART, I2C, SPI serial communication
Operation clock: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 of crystal oscillator
Two 32-bit timers and one 32-bit dual MODE timer
Four Channel PWM
Watchdog timer
Two 16-bit Sleep timer
In-Circuit Debugger
In-System programming/ In-Application programming
23/31 GPIO for QFN40/48
Built-in thermal sensor for monitoring relative temperature
Built-in eight channels 12-bits ADC for general purpose analog input (0V ~ 1.8 V)
Built-in Low Battery Detector
Layout
Package size (QFN5X5, 40 pins/ QFN6X6 48 pins)
2400 ~ 2483.5 MHz ISM frequency hopping system
Smart remote controller
Home and building automation
Wireless keyboard and mouse
Wireless toy and gaming
Helicopter and airplane radio controller
Bluetooth smart device
Smart remote controller
Home and building automation
Wireless keyboard and mouse
Wireless toy and gaming
Helicopter and airplane radio controller
Bluetooth smart device
Datasheet
Application Note
Reference circuit design (Module)
Reference/LIB code
Evaluation kit (EK)
Development Board (DVP)
ICE tool
Flash/OTP programming tool
Production test tool
*Please contact the agents or sales for more details
Application Note
Reference circuit design (Module)
Reference/LIB code
Evaluation kit (EK)
Development Board (DVP)
ICE tool
Flash/OTP programming tool
Production test tool
*Please contact the agents or sales for more details
